Hydration and leaching characteristics of cement pastes made from electroplating sludge

The purpose of this study was to investigate the hydration and leaching characteristics of the pastes of belite-rich cements made from electroplating sludge. The compressive strength of the pastes cured for 1, 3, 7, 28, and 90 days was determined, and the condensation of silicate anions in hydrates was examined with the ²⁹Si nuclear magnetic resonance (NMR) technology. The leachabilities of the electroplating sludge and the hardened pastes were studied with the multiple toxicity characteristic leaching procedure (MTCLP) and the tank leaching test (NEN 7345), respectively. The results showed that the electroplating sludge continued to leach heavy metals, including nickel, copper, and zinc, and posed a serious threat to the environment. The belite-rich cement made from the electroplating sludge was abundant in hydraulic β-dicalcium silicate, and it performed well with regard to compressive-strength development when properly blended with ordinary Portland cements. The blended cement containing up to 40% the belite-rich cement can still satisfy the compressive-strength requirements of ASTM standards, and the pastes cured for 90 days had comparable compressive strength to an ordinary Portland cement paste. It was also found that the later hydration reaction of the blended cements was relatively more active, and high fractions of belite-rich cement increased the chain length of silicate hydrates. In addition, by converting the sludge into belite-rich cements, the heavy metals became stable in the hardened cement pastes. This study thus indicates a viable alternative approach to dealing with heavy metal bearing wastes, and the resulting products show good compressive strength and heavy-metal stability.     

Influence of the nitrification inhibitor 3,4-dimethylpyrazole phosphate (DMPP) on ammonia-oxidizing bacteria and archaea in rhizosphere and bulk soil

In agricultural plant production nitrification inhibitors like 3,4-dimethylpyrazole phosphate (DMPP) are used to retard the microbial nitrification process of fertilized ammonium to enhance the nitrogen supply for cultivated crops and to reduce nitrogen losses from the production system. Besides the well-known ammonia-oxidizing bacteria (AOB) it is known for a few years that also ammonia-oxidizing archaea (AOA) are able to perform the first step in nitrification, hence being also a target for a nitrification inhibitor. However, so far no information are available concerning the effectiveness of DMPP and its extent towards AOB and AOA, neither in bulk soil nor in the root-rhizosphere complex. We investigated in a field experiment performed according to agricultural practice the effect of DMPP on the abundance of AOB and AOA two, four and eight weeks after fertilization. We observed impaired abundances of AOB but not of AOA in both soil compartments that were still visible eight weeks after application, possibly indicating a reduced effectiveness of the nitrification inhibitor in our study.     

Deposition velocity of PM2.5 sulfate in the summer above a deciduous forest in central Japan

In order to increase knowledge of aerosol dry deposition for the regional assessment of acid deposition and transboundary air pollution in East Asia, an experimental study on PM2.5 sulfate deposition was implemented in the early summer of 2009. The experimental field was located in a deciduous forest at the foot of Mt. Asama, central Japan. Aerosol fluxes were obtained using the aerodynamic gradient method. Three aerosol samplers were placed on an experimental tower at 21, 24 and 27 m above the ground surface, and collected PM2.5 on filters for chemical analysis. Vertical concentration differences between 21 m and 27 m of PM2.5 sulfate were detected significantly when the concentration exceeded 1 μg m^?3. Mean deposition velocity was estimated to be 0.9 ± 1.0 cm s^?1 in the daytime and 0.3 ± 0.3 cm s^?1 in the nighttime. In the case that a height-dependent correction in the roughness sub-layer was taken into account, the deposition velocities increased more, especially in daytime. Higher deposition velocities in the daytime were associated with larger friction velocities and unstable conditions. The deposition velocities observed in this study were in agreement with other experimental results found in the literature. On the other hand, they were higher than those calculated by theoretical models. Two empirical parameterizations (Wesely, M.L., Cook, D.R., Hart, R.L., 1985. Measurement and parameterization of particulate sulfur dry deposition over grass. Journal of Geophysical Research 90, 2131–2143; Ruijgrok, W., Tieben, H., Eisinga, P., 1997. The dry deposition of particles to a forest canopy: a comparison of model and experimental results. Atmospheric Environment 31, 399–415) were validated by the observations. The general trend of higher daytime and lower nighttime deposition velocities was similar among the observation and the two parameterizations. The large variability found in the measurement was not reproduced by the parameterizations, because it is attributable to random error from the differences between the samplers. The observations were in accordance with the parameterization of Ruijgrok et al. (1997) for a forest, although much larger than that of Wesely et al. (1985) for grasslands. This indicates the large difference in aerosol deposition velocities between forests and grasslands.     

Optimal planning of co-firing alternative fuels with coal in a power plant by grey nonlinear mixed integer programming model

Energy supply and use is of fundamental importance to society. Although the interactions between energy and environment were originally local in character, they have now widened to cover regional and global issues, such as acid rain and the greenhouse effect. It is for this reason that there is a need for covering the direct and indirect economic and environmental impacts of energy acquisition, transport, production and use. In this paper, particular attention is directed to ways of resolving conflict between economic and environmental goals by encouraging a power plant to consider co-firing biomass and refuse-derived fuel (RDF) with coal simultaneously. It aims at reducing the emission level of sulfur dioxide (SO(2)) in an uncertain environment, using the power plant in Michigan City, Indiana as an example. To assess the uncertainty by a comparative way both deterministic and grey nonlinear mixed integer programming (MIP) models were developed to minimize the net operating cost with respect to possible fuel combinations. It aims at generating the optimal portfolio of alternative fuels while maintaining the same electricity generation simultaneously. To ease the solution procedure stepwise relaxation algorithm was developed for solving the grey nonlinear MIP model. Breakeven alternative fuel value can be identified in the post-optimization stage for decision-making. Research findings show that the inclusion of RDF does not exhibit comparative advantage in terms of the net cost, albeit relatively lower air pollution impact. Yet it can be sustained by a charge system, subsidy program, or emission credit as the price of coal increases over time.     

Highly siliceous MCM-48 from rice husk ash for CO2 adsorption

Mesoporous MCM-48 silica was synthesized using a cationic-neutral surfactant mixture as the structure-directing template and rice husk ash (RHA) as the silica source. The MCM-48 samples were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), N₂ physisorption and SEM. X-ray diffraction pattern of the resulting MCM-48 revealed typical pattern of cubic Ia3d mesophase. BET results showed the MCM-48 to have a surface area of 1024 m²/g and FT-IR revealed a silanol functional group at about 3460 cm⁻¹. Breakthrough experiments in the presence of MCM-48 were also carried out to test the material's CO₂ adsorption capacity. The breakthrough time for CO₂ was found to decrease as the temperature increased from 298 K to 348 K. The steep slopes observed shows the CO₂ adsorption occurred very quickly, with only a minimal mass transfer effect and very fast kinetics. In addition, amine grafted MCM-48, APTS-MCM-48 (RHA), was prepared with the 3-aminopropyltriethoxysilane (APTS) to investigate the effect of amine functional group in CO₂ separation. An order of magnitude higher CO₂ adsorption capacity was obtained in the presence of APTS-MCM-48 (RHA) compared to that with MCM-48 (RHA). These results suggest that MCM-48 synthesized from rice husk ash could be usefully applied for CO₂ removal.     

Applying mass transfer models for controlling organic compounds in ozonation process

Mass transfer plays a significant role in the ozonation process. The prediction models associated with the volumetric overall mass transfer coefficient (K_La) and initial fractional ozone absorption (FOA₀) during the ozonation process were developed through the use of dimensional analysis. It was found that the volumetric overall mass transfer coefficient is the function of diffusivity, agitation speed, and gas flow rate, and the parameters in the K_La equation are determined. Application of the prediction models for K_La and FOA₀ would yield information to choose the most practically feasible operating parameters. The removability of total organic carbon (TOC) can be estimated based on the mass balance relationship and kinetic expression of TOC oxidation, during continuous laboratory ozonation of humic acid solution. The reaction rate constant averaged 0.0291 L/mg·min. The developed model in combination with the mass transfer and reaction kinetics can be used successfully in forecasting the most efficient agitation speed to control the formation of organic compounds. Also, the critical value of ozone partial pressure to achieve the highest TOC removability can be determined through the use of the above developed model.     

A model for prediction of product distributions for the reactions of phenol derivatives with hydroxyl radicals

In this study, with the intention of estimating the photocatalytic or photodegradation rates and finding certain predictors to be used for the determination of the most probable reaction path and the primary intermediate, the reactions of (*)OH radicals with 11 phenol derivatives including benzene were modeled. For 43 possible reaction routes, calculations of the geometric parameters, the electronic and thermodynamic properties of the reactants, the product radicals and the transition state complexes were performed with the semiempirical PM3 and DFT/B3LYP/6-31G(*) methods. The solvation effects were computed using COSMO as the solvation model. Based on the results of quantum mechanical calculations, the rate constants, the branching ratios and the product distributions of all the possible reaction paths were calculated by means of the transition state theory. Three predictors were determined for the prediction of the most probable transition state and the reaction path. The differences in the reaction rates were explained in terms of the presence of hydrogen bonds in the transition state complexes and the entropy effects. Finally the results obtained were compared with the available experimental data in order to assess the reliability of the proposed model.     

Characterization of a simple bacterial consortium for effective treatment of wastewaters with reactive dyes and Cr(VI)

A microbial consortia consisting of three bacteria isolated from tanning and textile wastewaters revealed high capacity to simultaneously bioaccumulate dye and Cr(VI). The identity of the bacteria were determined by 16S rRNA gene analysis to be closely related to Ochrobactrium sp., Salmonella enterica and Pseudomonas aeruginosa. Dependence of initial pH values and range of concentrations of the dye Reactive Black B (33.2-103.1 mg l(-1)) and Cr(VI) (19.9-127.6 mg l(-1)) were examined to find the effect of pH on the dye and Cr(VI) bioaccumulation. Optimal pH for growth of the consortia in media containing 35 mg l(-1) dye and 50 mg l(-1) Cr(VI) was determined to be around 8. The Cr(VI) bioaccumulation by the consortia was rapid in media containing molasses with or without reactive dye with a maximum Cr(VI) bioaccumulation yield ranging from 90% to 99% within a 2-4d period. A slightly lower yield for the dye bioaccumulation was measured with a maximum dye bioaccumulation of 80% at 59.3 mg l(-1) dye and 69.8 mg l(-1) Cr(VI). The highest specific Cr uptake value was obtained as 76.7 mg g(-1) at 117.1 mg l(-1) Cr(VI) and 50.8 mg l(-1) dye concentration. This ability to bioaccumulate dye and Cr(VI) was more efficient than the enriched sludge from which they were isolated.     

Ozone influence on native vegetation in the Jizerske hory Mts. of the Czech Republic: results based on ozone exposure and ozone-induced visible symptoms

Ozone levels in the Jizerske hory Mts. measured at 13 sites by diffusive samplers during the 2006 and 2007 vegetation seasons are presented. A significant ozone gradient (5.4 ppb in 2006 and 4.0 ppb in 2007) per 100 m difference in altitude between 370 and 1,100 m a.s.l. was recorded. High-resolution maps of phytotoxic potential were developed. The AOT40 threshold (5 ppm h) was exceeded over the entire area with the highest levels exceeding this threshold by 12 times in the upper portions of the mountains. Ozone visible injury was evaluated at four of the monitoring sites on seven native plant and tree species. Four species showed ozone-like symptoms, two of which (Rubus idaeus and Fagus sylvatica) were confirmed as ozone-induced. Our results indicate that ambient ozone is likely to have a much lower impact on the Jizerske hory Mts. vegetation than expected, considering the measured ambient ozone exposures and favourable environmental conditions for ozone uptake.     

Distribution of polychlorinated biphenyls and organochlorine pesticides in wild mussels from two different sites in central Croatian Adriatic coast

Levels of 24 organochlorine compounds were investigated in wild mussels collected at two locations (Krka estuary and Ka?tela Bay) on the Croatian Adriatic coast in 2003, 2005, 2006, 2007, and 2008. PCB and OCP ranges found at the two locations overlapped and followed similar profiles despite the differences between the two locations indicating that they share a common pollutants source. Among organochlorine pesticides, the dominant compound was DDT. Among indicator PCBs, the dominant compound was PCB-153, while PCB-118 was dominant among the remaining 11 congeners. Generally, the sum of six indicator PCBs was constantly greater than the sum of 11 congeners at both locations. α-HCH/γ-HCH and DDE/DDT ratios were below 1, indicating recent input of γ-HCH and DDT into the marine environment. In the investigated period, almost all organochlorine compounds reached the highest values in 2006. The levels of PCBs and OCPs in this study were considerably below the Croatian maximum permissible levels, confirming that they do not pose any threat for human health.